Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 4-9) can be Hotkey toggled On and
Off. To toggle the Beeper, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 3-1).
2. Press [B]
After you press B, the Beeper toggles On or Off. The Command Line
displays Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
[Num Lock] + [*] or
[Num Lock] + [-]
[Port ID] [Enter] Switches access to the computer that
corresponds to that Port ID.
[T] [n] [Enter] Sets the Auto Scan interval to n seconds -
where n is a number from 1 - 255.
[A] Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P] or
Left Click pauses Auto Scanning. Pressing
Any Key or another Left Click resumes Auto
Scanning.
[←]Invokes Skip Mode and Skips from the
current port to the first accessible port
previous to it.
[→]Invokes Skip Mode and Skips from the
current port to the next accessible port.
[↑]Invokes Skip Mode and Skips from the
current port to the last accessible port of the
previous Station.
[↓]Invokes Skip Mode and Skips from the
current port to the first accessible port of the
next Station.
[B] Toggles the Beeper On or Off.
2003-06-20
ACS-1208A / ACS-1216A User Manual
3-6