ATEN Technology ACS-1208A F3 SET, Setting Function, Scroll Lock Scroll Lock or Ctrl Ctrl

ACS-1208A / ACS-1216A User Manual

F3 SET:

This function allows the Administrator and each User to set up his own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that is provided during Login.

To change a setting:

1.Double Click it; or move the highlight bar to it, then press [Enter].

2.After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:

Setting	Function
OSD HOTKEY	Selects which Hotkey activates the OSD function:
	[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
	Since the Ctrl key combination may conflict with programs
	running on the computers, the default is the Scroll Lock
	combination.
PORT ID	Allows you to position where the Port ID appears on the
DISPLAY	screen. The default is the upper right corner, but you can
POSITION	choose to have it appear anywhere on the screen.
	Use the Mouse or the Arrow Keys plus Pg Up, Pg Dn, Home,
	End, and 5 (on the numeric keypad with Num Lock off), to
	position the Port ID display, then Double Click or press [Enter]
	to lock the position and return to the Set submenu.
PORT ID	Determines how long a Port ID displays on the monitor after a
DISPLAY	port change has taken place. The choices are: User Defined -
DURATION	which lets you select the amount of time (from 1 - 255 sec.);
	and Always On - which displays the Port ID at all times. If you
	select User Defined, key in the number of seconds, then press
	[Enter]. The default is 3 Seconds. A setting of 0 (zero)
	disables this function.

(Table continues on next page)

4-6

2003-06-20