ACS1208 / ACS1216 User Manual

Hotkey Beeper Control

The Beeper (see Activate Beeper, page 29) can be Hotkey toggled On and Off. To toggle the Beeper, key in the following Hotkey combination:

1.Invoke Hotkey Mode with the [NumLock] + [*] or [NumLock] + [-]combination

2.Press [B]

After you press B, the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.

Hotkey Summary Table

[Num Lock] + [*] or

[Port ID] [Enter]

Switches access to the computer that

[Num Lock] + [-]

 

corresponds to that Port ID.

 

 

 

 

[T] [n] [Enter]

Sets the Auto Scan interval to n seconds -

 

 

where n is a number from 1 - 255.

 

 

 

 

[A]

Invokes Auto Scan Mode.

 

 

When Auto Scan Mode is in effect, [P] or

 

 

Left Click pauses Auto Scanning.

 

 

When Auto Scanning is paused, pressing

 

 

Any Key or another Left Click resumes

 

 

Auto Scanning.

 

 

 

 

[←]

Invokes Skip Mode and Skips from the

 

 

current port to the first accessible port

 

 

previous to it.

 

 

 

 

[→]

Invokes Skip Mode and Skips from the

 

 

current port to the next accessible port.

 

 

 

 

[↑]

Invokes Skip Mode andSkips from the

 

 

current port to the last accessible port of

 

 

the previous Station.

 

 

 

 

[↓]

Invokes Skip Mode andSkips from the

 

 

current port to the first accessible port of

 

 

the next Station.

 

 

 

 

[B]

Toggles the Beeper On or Off.

 

 

 

20