CL5708 / CL5716 User Manual
No. | Component | Description |
|
|
|
1 | Handle | Pull to slide the KVM module out; push to slide the module in |
|
| (see item 2 in this table). |
|
|
|
2 | Slide Release | In order to slide the console out, you must first release it by |
|
| sliding these tabs to the inside. See page 21 for details on |
|
| sliding the console in and out. |
|
|
|
3 | LCD Display | After sliding the KVM module out, flip up the cover to access |
|
| the LCD monitor. |
|
|
|
4 | LCD Controls | The LCD On/Off switch is located here, as well as buttons to |
|
| control the position and picture settings of the LCD display. |
|
| |
|
|
|
5 | Port LEDs | An ON LINE LED lights to indicate that the computer |
|
| attached to its corresponding port is up and running. |
|
|
|
6 | Fingerprint | Use the fingerprint reader as an alternate means of logging in |
| Reader | to the switch. See SET USER LOGIN, page 38. |
| (Optional) |
|
|
|
|
7 | Keyboard | Standard |
|
|
|
8 | Touchpad | Standard mouse touchpad |
|
|
|
9 | Station/Port | Press the UP or DOWN buttons for the Port ID and Station ID |
| Switches | to bring the KVM focus to the computer attached to the |
|
| corresponding port. See Manual Port Switching, page 28. |
|
|
|
10 | External Mouse | A USB mouse port is provided for users who prefer to use an |
| Port | external mouse. |
|
|
|
11 | Power LED | Lights to indicate that the unit is receiving power. |
|
|
|
12 | Rack Mounting | The rack mount brackets located at each corner of the unit |
| Brackets | secure the chassis to a system rack. |
|
|
|
13 | Lock LEDs | Num Lock, Caps Lock, Scroll Lock LEDs are located here. |
|
|
|
14 | Reset Switch | Located to the right of the Lock LEDs. Press this recessed |
|
| switch in with a small object to perform a system reset. |
|
|
|
15 | Firmware | Firmware Upgrade Port: The Firmware Upgrade Cable |
| Upgrade | that transfers the firmware upgrade data from the adminis- |
| Section | |
| trator's computer to the CL5708 / CL5716 plugs into this | |
|
| |
|
| |
|
| Firmware Upgrade Switch: During normal operation this |
|
| |
|
| ware Upgrade Utility, page 57 for firmware upgrading |
|
| details.) |
|
|
|
16 | USB Port | The USB port is available to connect a USB 1.1 peripheral |
|
| device (flash drive, |
|
|
|
8