Chapter 4. OSD Operation

(Continued from previous page.)

Setting

Function

 

 

SCAN–SKIP

Selects which computers will be accessed under skip mode (see

MODE

F5 SKP, page 42), and Auto Scan mode (see F7 SCAN, page 44.

 

Choices are:

 

ALL - All the ports which have been set accessible (see SET

 

ACCESSIBLE PORTS, page 39);

 

QUICK VIEW - Only those ports which have been set accessible

 

and have been selected as quick view ports (see SET QUICK

 

VIEW PORTS, page 40);

 

POWERED ON - Only those ports which have been set accessible

 

and are powered on;

 

QUICK VIEW + POWERED ON - Only those ports which have

 

been set accessible and have been selected as quick view ports

 

and are powered on. The default is ALL.

 

Note: The quick view choices only show up on the administrator's

 

screen, since only he has Quick View setting rights (see SET

 

QUICK VIEW PORTS, page 40, for details).

 

 

SCREEN

If there is no input from the console for the amount of time set with

BLANKER

this function, the screen is blanked. Key in a value from 1–30

 

minutes, then press [Enter]. The default setting of 0 disables this

 

function.

 

 

HOTKEY

Enables / disables the hotkey command function in case a conflict

COMMAND

occurs with programs running on the computers.

MODE

 

 

 

HOTKEY

Sets the keyboard shortcut for invoking Hotkey Mode (see

 

page 45). Choices are: [NUM LOCK] + [-](minus) (default), and

 

[CTRL] + [F12].

OSD

Sets the language used in the OSD. Choices are: English,

LANGUAGE

German, Japanese, Simplified Chinese and Traditional Chinese.

 

 

TOUCHPAD

Enables / disables the touchpad.

 

 

37