ATEN Technology CS-104 [1], [4], [Enter], [Space], [Space], NOTE: #, Left [Shift], right [Shift], [Alt] [Ctrl] [Shift] + # + [Enter], [Alt] [Ctrl] [Shift] + [0] + [Enter]

then enter the command keystrokes and complete the command by hitting the [Enter] key.

To start the Auto-Scan mode: (This mode scans all connected computers that are in a power on state,

one- by-one, from the first computer in the first stage, to the last computer in the last stage)

[Alt] [Ctrl] [Shift] + [0] + [Enter]

To stop Auto-Scan mode:

[Space]

To start the Previous/Next mode: (This mode selects from all connected computers that are in a power on state, one-by-one, from the first computer in the first stage, to the last computer in the last stage)

[Alt] [Ctrl] [Shift] + [9] + [Enter]

To select the previous port:

Left [Shift]

To select the next port:

right [Shift]

To stop the Previous/Next mode:

[Space]

To select a first-stage port directly:

[Alt] [Ctrl] [Shift] + # + [Enter]

(# is the number of the first-stage port)

To select a second-stage port directly:

[Alt] [Ctrl] [Shift] + # + # + [Enter]

( The 1st # selects the number of a first-stage port)

( The 2nd # selects the number of a second-stage port)

To select a third-stage port directly:

[Alt] [Ctrl] [Shift] + # + # + # + [Enter]

( The 1st # selects the number of a first-stage port)

( The 2nd # selects the number of a second-stage port) ( The 3rd # selects the number of a third-stage port)

NOTE: # is a numerical digit between [1] and [4]