Installation
1.Make sure that power to each of the devices you will be connecting up has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.
2.Make sure that all devices you will be connecting up are properly grounded.
Cable Connection
To set up your Master View
1.Plug your keyboard, DVI monitor, mouse, microphone, and speakers into the Console Ports located on the unit’s rear panel.
2.Using a KVM cable set (provided with this package), plug the DVI connector into any available DVI socket in the CPU Port section of the switch, and plug the accompanying keyboard, mouse, microphone and speaker connectors into their corresponding sockets.
Note: 1. Use the end of the cable that has the shorter connector leads - the end with the longer leads is for plugging into the computer.
2.Be sure that all the plugs are in the same CPU Port sockets (all in Port 1, all in Port 2, etc.).
3.The CPU Port sockets and cable plugs are color coded and marked with an appropriate icon for easy installation.
3.At the other end of the cable, plug the keyboard, DVI monitor, mouse, microphone, and speaker connectors into their respective ports on the computer.
4.Plug the power adapter that came with your switch into an AC power source, then plug power adapter cable into the switch’s Power Jack.
-6 -