1.Port Selection Switches
Pressing a switch brings the focus to the computer attached to its corresponding port. See p. 13 for operation details.
2.Port LEDs
The Port LEDs are built into the Port Selection Switches. The upper ones are the KVM Port LEDs; the lower ones are the USB LEDs:
LED | Indication |
|
|
KVM: M Lights DIM ORANGE to indicate that the computer attached to its corresponding port is up and running (On Line).
MChanges to BRIGHT ORANGE to indicate that the computer attached to its corresponding port is the one that has the KVM focus (Selected).
MFlashes to indicate that the computer attached to its corresponding port is being accessed under Auto Scan mode.
USB: M Lights DIM GREEN to indicate that there is a USB cable connection to the computer attached to its corresponding port. Does not light if there is no USB connection to the computer.
MChanges to BRIGHT GREEN to indicate that the computer attached to its corresponding port is the one that has access to the USB peripherals.
3.Ethernet LEDs
The ethernet LEDs light to indicate the data transmission status of their corresponding ports on the ethernet hub:
LED | Status | Indication |
LAN Link | Off | No data connection to the computer attached to its |
|
| corresponding port. |
|
|
|
| On | Data connection to the computer attached to its |
|
| corresponding port is in effect. |
|
|
|
| Flashing | Data is being transmitted through the port. |
|
|
|
10/100Mbps | Off | Data transmission speed is 10Mbps. |
|
|
|
| On | Data transmission speed is 100Mbps. |
|
|
|
4.USB Hub Section
USB peripherals (printers, scanners, etc.) can plug into either port.
6