Hotkey Setting Mode

Disable Port Switching Keys

To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]), do the following:

1.Invoke HSM (see p. 17).

2.Press [X] [Enter].

Note: This procedure is a toggle. To enable the Port Switching keys repeat steps 1 and 2.

Restore Default Settings

To reset the CS-1772 / CS-1774 to its default hotkey settings, do the following:

1.Invoke HSM (see p. 17).

2.Press [R] [Enter].

All hotkey settings return to the factory default settings. A table showing the default settings is provided in the Appendix, on p. 32.

Invoke Firmware Upgrade Mode

To set the CS-1772 / CS-1774 to Firmware Upgrade Mode, do the following:

1.Invoke HSM (see p. 17).

2.Key in: upgrade

3.Press [Enter].

The front panel port LEDs flash to indicate Firmware Upgrade Mode is in effect.

Note: To exit Firmware Upgrade Mode, you must power off the switch.

21

2005-03-16