Hardware Setup
Cable Connection
1.Make sure that power to all the devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.
2.Make sure that all devices on the installation are properly grounded.
To set up your Master View
1.Plug your keyboard, mouse and monitor into the Console Ports located on the unit’s rear panel.
2.Plug your microphone and speakers into the Console microphone and speaker jacks located on the unit’s rear panel.
3.Using a KVM cable set (provided with this package), plug the custom SPHD connector into any available CPU Port on the switch and plug the accompanying microphone and speaker connectors into the CPU Port’s microphone and speaker jacks.
Note: 1. The connectors and jacks are color coded and marked with an appropriate icon for easy installation.
2.Be sure that all the plugs are in the same CPU Port sockets (all in Port 1, all in Port 2, etc.).
4.At the other end of the cable, plug the USB keyboard/mouse, USB hub, video, microphone and speaker cables into their respective ports on the computer.
5.Use Cat5 cable to connect any available ethernet port on the switch to the computer’s ethernet port.
Repeat steps 3 - 5 for any other computers you are connecting up.
6.Plug the cable from your external LAN source into any available ethernet port on the switch.
7.Plug the power adapter that came with your switch into an AC power source, then plug the power adapter cable into the switch’s Power Jack.
8.Plug your USB peripherals into the USB hub section on the front panel.
9