Installation
1.Make sure that power to all the devices you will
be connecting up has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.
2.Make sure that all devices on the installation are properly grounded.
Refer to the installation diagram on the next page as you perform the following:
1.Plug your keyboard, monitor and mouse into their ports on the
Note: When using a wireless composite keyboard and mouse, its USB cable must plug into the
2.Plug your speakers into the
3.Plug the USB, video, and speaker connectors of the attached KVM cables into their respective ports on the computer you are installing.
Note: The computer attached to the cable with one dot at its base is the Port 1 computer; the computer attached to the cable with two dots at its base is the Port 2 computer, etc. (see p. 7 for hotkey port selection).
4.Turn on the power to the computers.
Note: The
- 5 -
