Components

Front View:

1. Port Selection Switches
MPress a switch to give the KVM focus to the system
attached to its corresponding port.
MPressing Buttons 1 and 2 simultaneously for 3 seconds
starts Auto Scan Mode (see p. 10).
MWhile in Auto Scan Mode, pressing either button exits
Auto Scan Mode and switches the KVM focus to its
corresponding port.
2. Port LEDs
The Port LEDs are built into the Port Selection Switches. A lit
LED indicates that its corresponding Port is the one that has
the KVM focus.
Depending on the Port’s status, the LED may flash
according to a specific pattern (see the table on p. 10 for
details).
- 5 -
1 & 2
2003-02-18