KH0116 User Manual
(Continued from previous page.)
No. | Component | Description |
|
|
|
3 | Remote | The KH0116 can be operated from a remote console (up to |
| Console Area | 150m away) with the purchase of the |
|
| Extender system. |
|
| If you choose to use a remote console, its cable plugs into |
|
| this connector. |
|
| Normally, both consoles can access the KH0116. Clicking |
|
| the Disable Remote button to the In position disables the |
|
| Remote Console – only the Local Console has access to |
|
| the switch. |
|
| Details on using the KH0116 with the |
|
| Extender system are provided on page 13. |
|
|
|
4 | Firmware | This area consists of two components: The Firmware |
| Upgrade Area | Upgrade Port; and the Firmware Upgrade Reset Switch. |
|
| The Firmware Upgrade Cable that transfers the |
|
| firmware upgrade data from the administrator's |
|
| computer to the KH0116 (see p. 42), plugs into the |
|
| Firmware Upgrade Port's |
|
| During normal operation and while performing a |
|
| firmware upgrade, this switch should be in the NORMAL |
|
| position. If a firmware upgrade operation does not |
|
| complete successfully, slide this switch to the |
|
| RECOVER position and do a warm reset to return the |
|
| switch to its prior firmware state. |
|
| After returning the switch to its prior firmware state, |
|
| slide the switch back to the NORMAL position to |
|
| attempt the firmware upgrade again, or to use the |
|
| switch with its prior firmware. |
|
|
|
5 | Power LED | Lights to indicate that the KH0116 is powered up and |
|
| ready to operate. |
|
|
|
6 | Station ID LED | The KH0116's Station ID is displayed here. If this is a |
|
| Single Station installation (see p. 10), or the First Station |
|
| on a Daisy Chained installation (see p. 11), the KH0116 |
|
| has a Station ID of 01. |
|
| On a Daisy Chained installation, the KH0116 |
|
| its position and displays the Station ID that corresponds to |
|
| its place in the chain. (see Port ID Numbering, p. 17 for |
|
| details). |
|
|
|
6