KH0116 User Manual

(Continued from previous page.)

Setting

Function

 

 

SET QUICK

This function lets the Administrator select which Ports to include as

VIEW PORTS

Quick View ports.

 

Š To select/deselect a port as a Quick View Port, Double Click the

 

port you want, or use the Navigation Keys to move the highlight

 

bar to it, then press [Enter].

 

Š When a port has been selected as a Quick View Port, an

 

arrowhead displays in the QV column of the LIST on the Main

 

Screen to indicate so. When a port is deselected, the arrowhead

 

disappears.

 

Š If one of the Quick View options is chosen for the LIST view (see

 

F2 LIST, p. 23), only a Port that has been selected here will

 

display on the List.

 

Š If one of the Quick View options is chosen for Auto Scanning

 

(see SCAN/SKIP MODE, p. 25), only a Port that has been

 

selected here will be Auto Scanned.

 

The default is for no ports to be selected.

 

 

SET

This function allows the Administrator to define User access to the

ACCESSIBLE

computers on the installation on a Port-by-Port basis.

PORTS

For each User, select the target Port; then press the [Spacebar] to

 

 

cycle through the choices:

 

F (Full access)

 

V (View Only), or

 

Blank (A blank setting means that no access rights are granted.

 

The Port will not show up on the User's LIST on the Main Screen.)

 

Repeat until all access rights have been set, then press [Enter].

 

The default is F for all users on all Ports.

(Continues on next page.)

28