Chapter 1. Introduction

LCD Module

1

4

2

3

No.

Component

Description

 

 

 

1

LCD Display

To access the LCD monitor, slide the LCD module out and flip

 

 

up the cover. See Opening the Console, page 19, for details

 

 

on sliding the LCD module out.

 

 

 

2

LCD Controls

These buttons control the position and picture settings of the

 

 

LCD display. See LCD OSD Configuration, page 25, for

 

 

details.

 

 

 

3

LCD On/Off

Push this button to turn the LCD monitor on and off. The

 

Button

button lights when the LCD monitor is off to indicate that only

 

 

the monitor is off – not the KVM switch itself.)

 

 

 

4

Firmware

Firmware Upgrade Port: The Firmware Upgrade Cable that

 

Upgrade Section

transfers the firmware upgrade data from the administrator's

 

 

computer to the KL1508 / KL1516 plugs into this RJ-11

 

 

connector.

Firmware Upgrade Switch: During normal operation this switch should be in the NORMAL position. (See The Firmware Upgrade Utility, page 55 for firmware upgrading details.)

9