Appendix
5.Slide the switch open and closed a couple of times to be sure that it is properly aligned and operating smoothly. (See Opening the Console, page 19, for opening and closing procedures.)
6.After determining that the switch is properly lined up and operating correctly, finish up by fully tightening down the partially tightened front attachment screws inserted in step 3.
Dedicated Invocation Keys
Two dedicated keys are provided on the keyboard module to make it easy to invoke Hotkey Mode and the OSD (as shown in the diagram below):
Note: These keys are toggles. Press once to invoke the feature; press again to exit.
Supported KVM Switches
The following is a list of supported KVM switches that can be used when configuring a daisy chained installation.
ACS1208A
ACS1216A
KH1508
KH1516
79