KL1508 / KL1516 User Manual

(F4 ADM continued)

Setting

Function

 

 

SET QUICK

This function lets the Administrator select which Ports to include as

VIEW PORTS

Quick View ports.

 

Š To select/deselect a port as a Quick View Port, use the Navigation

 

Keys to move the highlight bar to it, then press the [Spacebar].

 

Š When a port has been selected as a Quick View Port, an arrowhead

 

displays in the QV column of the LIST on the Main Screen to

 

indicate so. When a port is deselected, the arrowhead disappears.

 

Š If one of the Quick View options is chosen for the LIST view (see F2

 

LIST, page 33), only a Port that has been selected here will display

 

on the List.

 

Š If one of the Quick View options is chosen for Auto Scanning (see

 

SCAN/SKIP MODE, page 35), only a Port that has been selected

 

here will be Auto Scanned.

 

The default is for no ports to be selected.

 

 

SET

This function allows the Administrator to define User access to the

ACCESSIBLE

computers on the installation on a Port-by-Port basis.

PORTS

For each User, select the target Port, then press the [Spacebar] to

 

 

cycle through the choices: F (Full access), V (View Only), or blank.

 

Repeat until all access rights have been set, then press [Esc]. The

 

default is F for all users on all Ports.

 

Note: A blank setting means that no access rights are granted. The

 

Port will not show up on the User's LIST on the Main Screen.

 

 

RESET

If you change the position of one of the Stations in the daisy chain, the

STATION IDS

OSD settings will no longer correspond to the new situation. This

 

function directs the OSD to rescan the Station positions of the entire

 

installation and updates the OSD so that the OSD Station information

 

corresponds to the new physical layout.

 

Note: Only the Station Numbers get updated. Except for the Port

 

Names, all Administrator settings (such as Set Accessible Ports, Set

 

Quick View Ports, etc.), for all of the computers affected by the change,

 

have to be manually redone.

 

 

 

(continues on next page)

38