ATI Technologies 107-40214-20 manual Using RADEON MAC EDITION DVI-I Connector

Models: 107-40214-20 RADEON MAC EDITION

1 57
Download 57 pages 55.95 Kb
Page 36
Image 36
Using RADEON™ MAC® EDITION DVI-I Connector

Using RADEONMAC® EDITION DVI-I Connector

Your RADEONMAC® EDITION includes support for DVI-I.

You can use this feature to connect your RADEONMAC® EDITION to a digital flat panel display.

To output your computer’s display to a DVI-I digital flat panel:

1Turn off your computer and DVI-I flat panel.

2Ensure your RADEONMAC® EDITION is installed correctly.

3Looking at the back of your Mac, locate your RADEON

MAC® EDITION.

4Connect the DVI-I cable to the DVI-I connector on your RADEONMAC® EDITION. (See diagram below.)

DVI-I Connector

DVI-I Cable

5Locate the DVI-Iconnector on your DVI-I flat panel.

6Attach one end of your DVI-I cable to the DVI-I connector on your RADEONMAC® EDITION and the other end to the DVI-I connector on your DVI-I flat panel.

7Turn on your Mac and your DVI-I flat panel.

Your DVI digital flat panel is automatically enabled.

The RADEONMAC® EDITION can only support one VGA or DVI-I digital flat panel at a time.

Page 31 To output your computer’s display to a DVI-I digital flat panel:

Page 36
Image 36
ATI Technologies manual Using RADEON MAC EDITION DVI-I Connector, Your DVI digital flat panel is automatically enabled