ATI Technologies SR-81, SR-61, SR-131, SR-176, SR-221, SR-101 Table of Contents

Protector Installation & Operation Manual
Document #9610-60-1008-04
	Table of Contents
		Page
1. Installation of Coolant Protection Boot		5
1.1	Attach Interface Plate to Robot	5
1.2	Attach the Collision Protection Device (CPD) to the Robot Interface Plate	5
1.3	Attach the Stem Side Interface Plate to the Stem of the CPD	6
1.4	Apply 10–20 psi to CPD to Raise the Stem. This step is not required for
	spring-loaded units	6
1.5	Stretch (1) Garter Spring of the CPD Assembly as Shown	7
1.6	Slide (1) Coolant Sealant Boot over the Stem Side Interface Plate onto the
	CPD Cover	7
1.7	Secure the Coolant Sealant Boot to the CPD by Positioning the Garter
	Springs in the Spring Grooves on the Boot	8
2. Design/Procurement of Interface Plates		9
3. Drawings for Replacement Parts & Interface Plates		10
3.1	SR-61	10
3.2	SR-81	12
3.3	SR-101	14
3.4	SR-131	16
3.5	SR-176	18
3.6	SR-221	20
4. Terms and Conditions of Sale		22

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: 919.772.0115 • Fax: 919.772.8259 • www.ati-ia.com • Email: info@ati-ia.com

3