Quick Installation 7
CHAPTER 2:Installing Hardware
This chapter will guide you through the physical installation of your new All- in-Wonder® X1900 Series graphics card.
Quick Installation
For experienced users and system administrators, follow these brief instructions for installing your All-in-Wonder® X1900 card in the shortest possible time.
Quick Installation Steps
1Uninstall the drivers and software for your old graphics card.If you are using a motherboard containing an on-board graphics solution and do not intend to use it as part of a multiple monitor display, disable it.
2Shut down and disconnect your computer system.3Remove any previously installed card.4Install your new All-in-Wonder® X1900 card.5Reassemble and connect your computer system.6Install the All-in-Wonder® X1900 drivers and configuration software from the ATI Installation CD-ROM by doing one of the following:
•Run through the automatic ATISETUP utility; or•Start > Run > X:\ATISETUP.EXE (where X is the drive letter of your CD-ROM drive).