Monitor Configuration 21

For more information consult the HydraVision™ user’s guide included on the ATI Installation CD-ROM.

Monitor Configuration

Once the drivers and software have been installed, you can configure your monitor..

Warning - Choosing a refresh rate unsupported by your monitor may damage your monitor. Consult your monitor’s documentation if necessary.

To configure your primary display

1Navigate to the Control Panel and choose Display, or right-click on the desktop and choose Properties.

2Choose the Settings tab and select the screen resolution and color depth that best suit your requirements and your monitor’s performance.

3Click Advanced and select the Monitor tab.4Choose a refresh rate from the drop-down list.5Click OK to return to the desktop.

Reinstalling Drivers

You can install new drivers or reinstall existing drivers if there was a Windows® conflict.

Reinstall the drivers at any time using the ATISETUP utility located on the ATI Installation CD-ROM. The ATISETUP utility will start automatically if you insert the ATI Installation CD-ROM into your optical drive after the operating system has started.

To manually reinstall drivers

If your CD-ROM auto-run is not enabled and the ATISETUP utility does not start automatically, follow these steps.

1In the Windows® task bar, click Start.2From the Start menu, select Run.