Installing Drivers and Software in Windows® 19

CHAPTER 3:

Installing Software and Drivers

This chapter will guide you through the installation of the drivers and software associated with your All-in-Wonder® X1900 graphics card.

Installing Drivers and Software in

Windows®

You will need to install the All-in-Wonder® X1900 drivers and software in the following cases:

•After you have installed the card in your system.

•After you have reinstalled or upgraded your operating system.

This procedure applies to Windows® XP.

Software Installation Prerequisites

To install or remove the drivers, you must have administrator rights or be logged on as a user with administrator rights.

Your operating system must be installed and running before you can install the All-in-Wonder® X1900 drivers. You must also have Service Pack 1 (or higher) for Windows® XP.

Make sure your monitor cable is properly attached before you begin.

Note: The installation dialog will display in English if your operating system’s language is not supported.

To install ATI drivers and software

1Start your system. When the Found New Hardware Wizard comes up, click Cancel. When the System Settings Change window asks you to restart your computer, click No.