Connecting Your Subwoofer | 5 |
|
|
| |||
|
|
|
|
Instruction Manual
Connecting Your Subwoofer | Figure 2 |
| |
| AC Connection |
Use the
Warning: To prevent risk of electrical shock or damage to your equipment, always unplug all component AC cords before pro- ceeding with speaker and component connections! The last step in wiring your system should be plugging in the AC cords!
Subwoofer Line Out to Low Level In
Run an RCA cable from your receiver’s Sub Out jack to the L/Mono input jack on the back of the subwoofer (Figure 3). If your receiver/processor has stereo subwoofer outputs, connect these to both the L/Mono and R jacks on the back of the subwoofer (Figure 4).
Using the Low Level Output
If desired, you can run a low level signal through the subwoofer and out to another unit.This way you can add an additional subwoofer with mini- mal additional wiring. The signal that comes out of the output jacks is identical to the input signal.
Power Connection
Connect the power cord to an AC outlet only after making all other connections to the subwoofer. This will avoid any
chance of accidentally activating the
subwoofer while wiring. Atlantic Tech-
nology does not recommend plugging 
the subwoofer into the switched outlet of an amplifier,preamplifier,or receiver.The power demands of the sub-
woofer amplifier may exceed the power rating of the switched outlet and may damage the equipment.
Your subwoofer is totally automatic in its operation. The automatic on/ off circuitry will only activate the subwoofer in the presence of an audio signal from your system.After
