ENGLISH

 

 

 

 

LAN

Connect a UTP Ethernet cable (Cat-5 or Cat-

 

5e) to the LAN ports when connecting to a PC

 

 

or an office/home network of 10Mbps or

 

 

100Mbps.

 

RESET

After the device is powered on, press it to

 

reset the device or restore to factory default

 

 

settings.

 

 

0-3 seconds: reset the device

 

 

6 seconds above: restore to factory default

 

 

settings.

 

POWER

Connect the supplied power adapter to this

 

jack.

 

 

 

 

 

 

 

1.7 Information from ISP

WebRunnervwill scan automatically DSL Line for ADSL line parameters and choose correct PVC’s profile from its pre-definited profile. To configure your PPPoE connection, it is necessary to have Username and Password for your DSL account and make sure that it is configured in PPPoE with LLC encapsulation.

1.8 Cabling

Please refer to the following instructions for installation procedures:

•Connect your ADLS line to the RJ-11 jack labeled ADSL on the back of the WebRunner.

•Connect the CAT5/LAN cable to the jack labeled LAN on the back of the WebRunner. Connect the other end to the Network card of your PC.

Ensure that all other devices connected to the same telephone line as your Clipper (e.g. telephones, fax machines, analog modems) have a line filter (A01-AF2) connected between them and the wall socket (unless you are using a Central Splitter or Central Filter

29