Atlantis Land A02-RA141-W54 3.8 Resetting the ADSL Router, 3.8.1 Using The Reset Button, Save, Cancel, New Password, LabelDescription, Confirm Password

WebShare 141W

The following table describes the labels in this screen.

LabelDescription

New Password Type the new password in this field.

Confirm Password Type the new password again in this field.

SaveClick Apply to save your changes back to the ADSL Router.

CancelClick Cancel to begin configuring this screen afresh.

3.8 Resetting the ADSL Router

If you forget your password or cannot access the WebShare Wireless Router ADSL2+, you will need to reload the factory-default configuration file or use the RESET button the back of the ADSL Router. Uploading this configuration file replaces the current configuration file with the factory-default configuration file.

3.8.1 Using The Reset Button

Step 1. Make sure the SYS LED is on (not blinking).

Step 2. Press the RESET button for 10 (or more) seconds, and then release it. When the SYS LED begins to blink, the defaults have been restored and the ADSL Router restarts.

A02-RA141-W54 Pag. 23