
WebShare 141W
5.5 Configuring LAN
Click “Interface Setup” then “LAN” to open the following screen.
The following table describes the labels in this screen.
Router Local IPIP Address Enter the IP address of the ADSL Router in dotted decimal notation, for example, 192.168.1.254 (factory default).
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given). RIP Direction Select the RIP direction from None, Both, In Only and Out
Only.
RIP Version Select the RIP version from
Multicast IGMP (Internet Group Multicast Protocol) is a
SaveClick this button to save these settings back to the ADSL Router.
Cancel Click this button to reset the fields in this screen.
Pag. 33 |