VoIPMaster 260W

 

jack.

POWER Switch

A Power ON/OFF switch

The Ethernet Port # 4 (close the Phone Port) can be connected to the computer and console. You need a special console tool which is included in this package to connect the LAN cable of Port 4 when connecting to a PC’s RS-232 port (9-pin serial port).

2.4 Cabling

The most common problem is bad cabling or ADSL line. Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. As a first check, verify that the LAN Link, ADSL , PWR and SYS LEDs are lit. If they are not, verify that you are using the proper cables.

If the LED ADSL continually flashes You have to read Note (into section 3.6.3.2.3) in order to solve this problem

Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analog modems) have a line filter (A01-AF2) connected between them and the wall socket (unless you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician), and ensure that all line filters are correctly installed and the right way around.

Missing line filters or line filters installed the wrong way around can cause problems with your ADSL connection, including frequent disconnections.

9