VoIPMaster 260W
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN port first.
You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
| Bridge Interface | VLAN Port (Always starts with) | ||
Ethernet | P1 | / P2 | / P3 / P4 |
Ethernet1 | P2 | / P3 | / P4 |
Ethernet2 | P3 | / P4 |
|
Ethernet3 | P4 |
|
|
Management Interface: To specify which VLAN group has possibility to do device management, like doing web management.
NAT/NAPT can be applied to management interface only.
33