USER MANUAL

2.If you need to install the driver manually, refer each Windows OS to the following CD-Rom directory path: D:\Driver\<Windows OS>.

Note: (D:\ will depends on where the CD-ROM drive is located and <Windows OS> will depend on the Windows OS you are using).

3.Click on “A02-PCI-W54” icon to select NetFly PCI 54 Home Page.

4.Select “XP / 2K/ ME / 98” or “Vista”, depending on your operating system, and the install wizard will begin installing the software. Follow the install wizard instructions to complete the installation.

5.Follow the Install Shield Wizard Instructions. Click “Next” to continue and finish it.

The installation program will help you to setup the Wireless LAN utility.

Be noted that the Windows XP have its own Wireless Utility; you can either use the utility of Windows XP or the provided utility.

When the Wireless LAN Adapter was installed, you will see the icon on the Windows task bar. The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the utility icon that appears in the taskbar

IconQuality of Signal

 

 

 

Excellent

 

 

 

Good

 

 

 

Waiting connection

Not connected

When the icon in the toolbar represents in full green color then the signal strength has an excellent performance with the AP, if it represents in yellow color then the signal strength has a fair performance with the AP, and if the icon represents no color, then the signal strength has a worst performance with the wireless station.

NetFly PCI 54

10