USER MANUAL

•Make sure that there is a well environment that there is no much intrusion to have a better connection.

3.HARDWARE INSTALLATION

3.1 LED Indicator

Link

The Link LED indicator lighted green when the NetFly PCI 54 Wireless Adapter is connected to wireless network successfully.

3.2 Check the installation

The LEDs of the Wireless LAN Adapter are clearly visible and the status of the network link can be seen instantly:

1.Once the device is plugged to the station’s CardBus/PCI slot, the LED of the Wireless LAN Adapter will light up indicating a normal status.

2.When the device plugged to the station’s CardBus/PCI slot and the driver was installed, the ACT will start alternate blinking, it means that the device is starting to scan the wireless devices near the Wireless LAN Adapter.

3.While the Wireless LAN Adapter linked up and transmitting data to the Access Point or to other Wireless LAN station, the Link LED will lighted green.

4.SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless LAN Adapter.

4.1Utility and Driver Installation for Windows

1.Insert the CD-ROM and the Auto-run program will appear. Alternatively, open a file browser and double click on the autorun.exe file located in the CD directory. In some specific setting on Windows system, you may need to proceed the software manually, go to your Windows Start menu and choose

Run,

type

“D:\PCI\Vista\Setup.exe”

or

“D:\PCI\XP2K\Setup.exe”in the dialog box and click OK.

 

Note: (D:\ will depends on where the CD-ROM drive is located and <Windows OS> will depend on the Windows OS you are using).

NetFly PCI 54

9