Moxa Technologies EDS-408A Using Line-Swap-Fast-Recovery, Relay Warning List, 3-49, Port Event

EDS-408A/405A Series User’s Manual			Featured Functions
	Port Event		Warning e-mail is sent when…
	Link-on	The port is connected to another device.
	Link-off		The port is disconnected (e.g., the cable is pulled
			out, or the opposing device shuts down).
	Traffic-Overload		The port’s traffic surpasses the Traffic-Threshold for
			that port (provided this setting is Enabled).
	Traffic-Threshold (%)		Enter a nonzero number if the port’s
			Traffic-Overload setting is Enabled.
			A Traffic-Overload warning is sent every
	Traffic-Duration (sec.)		Traffic-Durationseconds if the average
			Traffic-Threshold is surpassed during that time
			period.

NOTE	The Traffic-Overload,Traffic-Threshold (%), and Traffic-Duration (sec) Port Event items
	are related. If you Enable the Traffic-Overload event, then be sure to enter a nonzero
	Traffic-Threshold percentage, as well as a Traffic-Duration between 1 and 300 seconds.

Override Relay Warning Settings

Click the checkbox to override the relay warning setting temporarily. Releasing the relay output will allow administrators to fix any problems with the warning condition.

Relay Warning List

Use this table to see if any relay warnings have been issued.

Using Line-Swap-Fast-Recovery

The Line-Swap Fast Recovery function, which is enabled by default, allows the EDS to return to normal operation very quickly after devices are unplugged and then re-plugged into different ports. The recovery time is in the order of a few milliseconds. Compare this with standard commercial switches for which the recovery time could be in the order of several minutes. To disable the Line-Swap Fast Recovery function, or to re-enable the function after it has already been disabled, access either the Console utility’s Line-Swap recovery page, or the Web Browser interface’s Line-Swap fast recovery page, as shown next.

3-49