Moxa Technologies EDS-405A Syslog Server, 3-56, EDS-408A/405A Series User’s Manual, Setting

EDS-408A/405A Series User’s Manual Featured Functions

Syslog Server 1
Setting	Description	Factory Default
IP Address	Enter the IP address of 1st Syslog Server used by your	None
	network.
Port Destination	Enter the UDP port of 1st Syslog Server.	514
(1 to 65535)

Syslog Server 2
Setting	Description	Factory Default
IP Address	Enter the IP address of 2nd Syslog Server used by your	None
	network.
Port Destination	Enter the UDP port of 2nd Syslog Server.	514
(1 to 65535)

	Syslog Server 3
		Setting	Description	Factory Default
	IP Address		Enter the IP address of 3rd Syslog Server used by your	None
			network.
	Port Destination		Enter the UDP port of 3rd Syslog Server.	514
	(1 to 65535)
NOTE	The following events will be recorded into the EDS-408A/405A’s Event Log table, and will then
	be sent to the specified Syslog Server:
	1.	Cold start
	2.	Warm start
	3.	Configuration change activated
	4.	Power 1/2 transition (Off Æ On), Power 1/2 transition (On Æ Off)
	5.	Authentication fail
	6.	Topology changed
	7.	Master setting is mismatched
	8.	DI 1/2 transition (Off Æ On), DI 1/2 transition (On Æ Off)
	9.	Port traffic overload
	10.	dot1x Auth Fail
	11.	Port link off / on

3-56