Moxa Technologies EDS-405A Coupling-Mode, Indicates either None, Dual Homing, or Ring Coupling

EDS-408A/405A Series User’s Manual Featured Functions

Coupling—Mode

Indicates either None, Dual Homing, or Ring Coupling.

Coupling—Coupling Port status

Indicates either Primary, or Backup.

Explanation of “Settings” Items

Redundancy Protocol

Setting	Description	Factory Default
Turbo Ring	Select this item to change to the
	Turbo Ring configuration page.
Turbo Ring V2	Select this item to change to the
	Turbo Ring V2 configuration page.	None
RSTP (IEEE	Select this item to change to the
802.1W/1D)	RSTP configuration page.
None	Ring redundancy is not active
Enable Ring 1
Setting	Description	Factory Default
Enabled	Enable the Ring 1 settings	Not checked
Disabled	Disable the Ring 1 settings
Enable Ring 2*
Setting	Description	Factory Default
Enabled	Enable the Ring 2 settings	Not checked
Disabled	Disable the Ring 2 settings

*You should enable both Ring 1 and Ring 2 when using the Dual-Ring architecture.

Set as Master

Setting	Description	Factory Default
Enabled	Select this EDS as Master	Not checked
Disabled	Do not select this EDS as Master
Redundant Ports
Setting	Description	Factory Default
1st Port	Select any port of the EDS to be	EDS-405A: port 4
	one of the redundant ports.	EDS-408A: port 7
2nd Port	Select any port of the EDS to be	EDS-405A: port 5
	one of the redundant ports.	EDS-408A: port 8
Enable Ring Coupling
Setting	Description	Factory Default
Enable	Select this EDS as Coupler	Not checked
Disable	Do not select this EDS as Coupler

3-26