Moxa Technologies EDS-405A, EDS-408A Relay Warning Events Settings, Activate your settings, 3-48

EDS-408A/405A Series User’s Manual Featured Functions

2.Activate your settings

After configuring, you will need to activate your EDS’s Relay Event Types.

Relay Warning Events Settings

NOTE: The user interface for the EDS-408A shows 8 ports.

Event Types

Event Types can be divided into two basic groups: System Events and Port Events. System Events are related to the overall function of the switch, whereas Port Events are related to the activity of a specific port.

The EDS supports one relay output. You can configure which relay output is related to which events. This helps administrators identify the importance of the different events.

System Event	Warning Relay output is triggered when…
Power Transition (OnÆOff)	EDS is powered up.
Power Transition (OffÆOn)	EDS is powered down.
Turbo Ring Break (Ring Master	When the EDS-408A/405A is the
Only)	Master of this Turbo Ring, and the
	Turbo Ring is disconnected.

NOTE	If the Turbo Ring Switch function is enabled, and the Turbo Ring DIP Switch is set to “ON”, the
	Turbo Ring Break Event cannot be changed. If not, the Turbo Ring Break Event can be set by
	using a web browser.
NOTE	The Turbo Ring Break Warning will be automatically enabled when the following configuration
	is set:
	1.	Turbo Ring DIP Switch functions are enabled.
	2.	The Hardware Turbo Ring DIP Switch is set to “ON”.
	3.	The Master DIP Switch is set to “ON”.

Please refer to “Configuring Basic Settings—Turbo Ring DIP Switch” for more details.

3-48