SMC Networks SMC2582W-B manual Save, Save & Restart, and Cancel Commands

•System Log. System events log.

•General. Global operations.

•Operational Mode. Operational mode settings.

•Password. For gaining rights to change the settings of the SMC2582W-B.

•Firmware Tools. For upgrading the firmware of the SMC2582W-B, backing up and restoring configuration, and configuration reset settings of the SMC2582W-B.

•TCP/IP. TCP/IP- related settings.

•Addressing. IP address settings for the SMC2582W-B to work with TCP/IP.

•DHCP Server. Settings for the DHCP (Dynamic Host Configuration Protocol) server on the SMC2582W-B.

•IEEE 802.11. IEEE 802.11b-related settings.

•Communication. Basic settings for the IEEE 802.11b interface of the SMC2582W-B to work properly with wireless clients.

•Security. Security settings for authenticating wireless users and encrypting wireless data.

•Advanced. Advanced settings of the SMC2582W-B.

•Packet Filters. Ethernet Type Filters, IP Protocol Filters, and TCP/UDP Port Filters settings.

•Management. UPnP, System Log, and SNMP settings.

3.1.2. Save, Save & Restart, and Cancel Commands

Fig. 16. Save, Save & Restart, and Cancel.

At the bottom of each page that contains settings you can configure, there are up to three but- tons—Save, Save & Restart, and Cancel. Clicking Save stores the settings changes to the mem- ory of the SMC2582W-B and brings you back to the start page. Clicking Save & Restart stores the settings changes to the memory of the SMC2582W-B and restarts the SMC2582W-B immediately for the settings to take effect. Clicking Cancel discards any settings changes and brings you back to the start page.

22