Manuals / SMC Networks / Computer Equipment / Network Router

SMC Networks SMC2582W-B manual D-2 SMCPWR-INJ3 Power Injector

Models: SMC2582W-B

1 52

Download 52 pages 17.05 Kb

Page 51

D-2: SMCPWR-INJ3 Power Injector

Input Power Requirements:
AC Input Voltage	: 90 – 264Vac
AC Frequency	: 47 – 63 Hz
AC Input Current	: 2A at 100Vac, 1A at 240Vac, (-48Vdc)
Power over LAN output Specification:
Pin Assignments and Polarity	: (+) 4/5 (–) 7/8
Output Voltage	: Aggregate Power:50W (48Vdc)
Mechanical Requirement:
Dimensions	: 4” x 5.5” x 1.5”
Weight:	: 1.38 Lbs

Indicators:

System Indicator:

AC Power (Green)

Power Active (Red) 0.05 A°’Io°’0.8 A

Over Current Protection (Red, Flash) Io°÷1.0 A

Connectors Shielded Rj-45

Environmental Conditions:
Operating Temperature	: 32° to 104° F (0° to 40° C)
Operating Humidity	: Maximum 90% Non-condensing
Storage Temperature	: -13° to 185° F (-25° to 85° C)
Storage Humidity	: Maximum 95%, Non-condensing
Operating Altitude	: -1000 to 10,000 ft. (-304.8 to 3048 m)
Safety Approval:
UL 1950
CSA A22.2 No. 950
EN 60950
CB
Regulatory Compliance:
CE Compliance

Electromagnetic Emission and Immunity:

FCC Part 15 Class B

51

Image 51

SMC Networks SMC2582W-B manual D-2 SMCPWR-INJ3 Power Injector

Contents

S M C 2 5 8 2 W - B Copyright Trademarks38 Tesla Reorient or relocate the receiving antenna Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Industry Canada - Class BWichtige Sicherheitshinweise Germany EC Conformance Declaration - Class B8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte 1. Introduction 1.2. Features IEEE 802.11b Operational modes1.1. Overview Firmware Tools Management RF IEEE 802.11b interface activity 1.3. LED DefinitionsALV Alive. Blinks when the SMC2582W-B is working normally LAN Ethernet LAN interface activity PWR Power2.1. Selecting a Power Supply Method 2. First-Time Installation and Configuration2.2. Mounting the SMC2582W-B on a Wall 2.3.1. Connecting the Managing Computer and the SMC2582W-B 2.3. Preparing for Configuration2.3.2. Changing the TCP/IP Settings of the Managing Computer 2.4. Configuring the SMC2582W-B 2.4.1. Entering the User Name and PasswordFig. 5. Entering the user name and password 2.4.2. Step 1 Selecting an Operational Mode Fig. 7. Operational modes settingsFig. 6.The Start page lowing table Table 1. Operational modes vs. wireless link types Fig. 9. IEEE 802.11b communication settings 2.4.3. Step 2 Configuring TCP/IP Settings2.4.4. Step 3 Configuring IEEE 802.11 Settings Fig. 8.TCP/IP settingsFig. 10.Wireless Distribution System settings To enable a WDS link 2. Select the corresponding Enabled check boxFig. 11. Sample wireless bridge network topology 2.4.5. Step 4 Reviewing and Applying Settings 1. Connect each SMC2582W-B to a computer via Ethernet 2.5. Deploying the SMC2582W-BTo adjust the alignments of a pair of SMC high-gain antennas Fig. 14. Adjusting alignments of external directional antennas3. Using Web-Based Management 3.1. Overview3.1.1. Menu Structure 3.1.2. Save, Save & Restart, and Cancel Commands Fig. 19. Status of associated wireless clients 3.1.3. Home and Refresh Commands3.2. Viewing Status 3.2.1. Associated Wireless Clients Fig. 17. Settings have been changedFig. 21. System log 3.2.2. Current DHCP Mappings3.2.3. System Log Fig. 20 Current DHCP mappings3.3. General Operations 3.3.1. Selecting an Operational Mode Fig. 23. Password 3.3.2. Changing Password3.3.3. Managing Firmware Table 2. Operational modes vs. wireless link types3.3.3.2. Backing up and Restoring Configuration Settings by HTTP 3.3.3.1. Upgrading Firmware by HTTP3.3.3.3. Upgrading Firmware by TFTP 3.3.3.4. Backing up and Restoring Configuration Settings by TFTP Fig. 31. Configuration backup/restoreFig. 30.TFTP Server NOTE Remember to select the Accept write requests check box of TFTP Server 3.4. Configuring TCP/IP Related Settings 3.4.1. Addressing 3.3.3.5. Resetting Configuration to Factory DefaultsNOTE By default the DHCP server function is disabled 3.4.2. DHCP Server 3.4.2.1. Basic3.4.2.2. Static DHCP Mappings Fig. 34. Basic DHCP server settings3.5.1.1. Basic 3.5. Configuring IEEE 802.11b-Related Settings 3.5.1. CommunicationFig. 38.Wireless Distribution System 3.5.1.3. Wireless Distribution System3.5.1.2. Link Integrity Fig. 37. Link integrity settingsFig. 40.Wireless Distribution System settings To enable a WDS link 4. Select the corresponding Enabled check boxFig. 41. Sample wireless bridge network topology Fig. 42. Network topology containing a loop 3.5.2. Security3.5.2.1. Basic Fig. 43. Basic IEEE 802.11b security settingsThere are up to 2 security modes Open System. No authentication, no data encryption3.5.2.2. MAC-Address-Based Access Control 3. Specify the MAC address of a wireless client to allow access, and then click Add Fig. 49. Ethernet type filters settings 3.6. Configuring Advanced Settings 3.6.1. Packet Filters3.6.1.1. Ethernet Type Filters 3.6.1.2. IP Protocol FiltersFig. 51.TCP/UDP port filters settings 3.6.1.3. TCP/UDP Port Filters3.6.2. Management 3.6.2.1. Basic 3.6.2.2. UPnPFig. 54. SNMP settings 3.6.2.3. System Log3.6.2.4. SNMP Fig. 53. System log settingsTo specify a trap target 1. Type the IP address of the target host 2. Type the Community for the host3. Select the corresponding check box next to the IP address text box Appendix A Default Settings Appendix B Troubleshooting B-1 Wireless Settings ProblemsB-2 TCP/IP Settings Problems Solve the following problems in order B-3 Other Problems C-3 Distances and Data Rates Appendix D Technical Specifications D-1 SMC2582W-B Wireless Bridge Interface 10/100 Mbps RJ-45 Connector RS-232c Serial Connector D-2 SMCPWR-INJ3 Power Injector 61-2-8875-7887 FOR TECHNICAL SUPPORT, CALLtechsupport@smc.com european.techsupport@smc-europe.com Fax 33 0 41 38 01