SMC Networks manual Mounting the SMC2582W-B on a Wall, Hang the SMC2582W-B on the screws

Fig. 2. Connecting Ethernet cables to SMCPWR-INJ3.

5.Check the “ACTIVE” LED: if power is successfully fed into the SMC2582W-B, the “ACTIVE” LED will be on (Red light); otherwise, the “ACTIVE” LED will be off.

6.If the electricity current is over the normal condition (Io°÷1.0 A), the “ACTIVE” LED will flash (Red light).

NOTE: SMCPWR-INJ3 is specially designed for “SMC2582W-B EliteConnect™ 2.4GHz 11Mbps Wireless Bridge.The use of SMCPWR-INJ3 with other Ethernet-ready devices that are not compliant to 802.3af may cause damage to the devices.

2.2. Mounting the SMC2582W-B on a Wall

The SMC2582W-B is wall-mountable.

1.Stick the supplied sticker for wall-mounting.

2.Use a ø7.0mm driller to drill a 25mm-deep hole at each of the cross marks.

3.Plug in a supplied plastic conical anchor in each hole.

4.Screw a supplied screw in each plastic conical anchor for a proper depth so that the SMC2582W-B can be hung on the screws.

5.Hang the SMC2582W-B on the screws.

11