Nokia E66 Advanced Wlan settings, Wlan security settings, WEP security settings, WEP key settings

Settings	Settings
	WLAN settings are normally defined automatically, and
	Advanced WLAN settings
	Select Options > Advanced settings. The advanced
	changing them is not recommended.
	To edit the settings manually, select Automatic
	configuration > Disabled, and define the following:
	• Long retry limit — Enter the maximum number of
	transmission attempts if the device does not receive
	a receiving acknowledgement signal from the
	network.
	• Short retry limit — Enter the maximum number of
	transmission attempts if the device does not receive
	a clear-to-send signal from the network.
	• RTS threshold — Select the data packet size at
	which the WLAN access point device issues a request
	to send before sending the packet.
	• TX power level — Select the power level of your
	device when sending data.
	• Radio measurements — Enable or disable the
	radio measurements.
	• Power saving — Select whether to use the WLAN
	power saving mechanism to save the power in the
	device battery. Using the power saving mechanism
	enhances the battery performance but may weaken
	WLAN interoperability.
	To restore all settings to their original values, select
	Options > Restore defaults.

142

WLAN security settings

Select Menu > Tools > Settings > Connection > Access points > Options > New access point, or select an access point and Options > Edit.

In the access point settings, select WLAN security mode and the desired mode.

WEP security settings

Select WEP as the WLAN security mode.

The wired equivalent privacy (WEP) encryption method encrypts data before it is transmitted. Access to the network is denied to users who do not have the required WEP keys. When the WEP security mode is in use, and your device receives a data packet not encrypted with the WEP keys, the data is discarded. In an ad-hoc network, all devices must use the same WEP key.

Select WLAN security settings and from the following:

•WEP key in use — Select the desired WEP key.

•Authentication type — Select Open or Shared.

•WEP key settings — Edit the settings for the WEP key.

WEP key settings

In an ad-hoc network, all devices must use the same WEP key.