Nokia E66 manual Potentially explosive, Environments, Emergency calls, Additional, 164

Additional safety information

information	Potentially explosive
	environments
	Switch off your device when in any area with a
safety	potentially explosive atmosphere, and obey all signs
	and instructions. Potentially explosive atmospheres
	include areas where you would normally be advised to
	turn off your vehicle engine. Sparks in such areas could
Additional	cause an explosion or fire resulting in bodily injury or
	even death. Switch off the device at refuelling points
	often, but not always, clearly marked. They include
	such as near gas pumps at service stations. Observe
	restrictions on the use of radio equipment in fuel
	depots, storage, and distribution areas; chemical
	plants; or where blasting operations are in progress.
	Areas with a potentially explosive atmosphere are
	below deck on boats, chemical transfer or storage
	facilities and areas where the air contains chemicals or
	particles such as grain, dust, or metal powders. You
	should check with the manufacturers of vehicles using
	liquefied petroleum gas (such as propane or butane) to
	determine if this device can be safely used in their
	vicinity.

164

Emergency calls

Important: This device operates using radio signals, wireless networks, landline networks, and user-programmed functions. If your device supports voice calls over the internet (internet calls), activate both the internet calls and the cellular phone. The device will attempt to make emergency calls over both the cellular networks and through your internet call provider if both are activated. Connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.

To make an emergency call:

1.If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also need to complete the following:

•Insert a SIM card if your device uses one

•Remove certain call restrictions you have activated in your device.

•Change your profile from offline or flight profile mode to an active profile.

2.Press the end key as many times as needed to clear the display and ready the device for calls.