Nokia E66 manual Eject the memory card, Connect the headset

Set up your device

20

Set up your device

Memory card may already be inserted in your device. Memory cards are also available as separate enhancements.

1.With the back of the device facing you, press the release buttons (1) and slide the back cover off (2).

2.Insert the memory card in the slot with the contact area first. Make sure that the contact area is facing the connectors on the device.

3.Push the card in until it locks into place.

4.Close the back cover.

Eject the memory card

Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

1.Press the power key briefly, and select Remove memory card.

2.Press the release buttons and slide off the back cover.

3.Press the end of the memory card to release it from the memory card slot.

4.Close the back cover.

Connect the headset

Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Connect the compatible headset to the headset connector of your device.