Nokia E66 manual Session initiation protocol SIP settings, Edit SIP profiles, 144

Settings	Settings
		New access point and define an access point that
	EAP plug-ins
	1.	To define the EAP plug-in settings, select Options >
		uses WLAN as a data bearer.
	2.	Select 802.1x or WPA/WPA2 as the security mode.
	3.	Select WLAN security settings > WPA/WPA2 >
		EAP > EAP plug-in settings.

Use EAP plug-ins

To use an EAP plug-in when you connect to a WLAN using the access point, select the desired plug-in and Options > Enable. The EAP plug-ins enabled for use with this access point have a check mark next to them. To not use a plug-in, select Options > Disable.

To edit the EAP plug-in settings, select Options > Edit.

To change the priority of the EAP plug-in settings, select Options > Raise priority to attempt to use the plug- in before other plug-ins when connecting to the network with the access point, or Options > Lower priority to use this plug-in for network authentication after attempting to use other plug-ins.

See the device help for more information on EAP plugins.

144

Session initiation protocol (SIP) settings

Select Menu > Tools > Settings > Connection > SIP settings.

Session initiation protocols (SIP) are used for creating, modifying, and terminating certain types of communication sessions with one or more participants (network service). Typical communication sessions are video sharing and net calls. SIP profiles include settings for these sessions. The SIP profile used by default for a communication session is underlined.

To create a SIP profile, select Options > New SIP profile > Use default profile or Use existing profile.

To select the SIP profile you want to use by default for communication sessions, select Options > Default profile.

Edit SIP profiles

Select Options > Edit, and select from the following:

•Profile name — Enter a name for the SIP profile.

•Service profile — Select IETF or Nokia 3GPP.

•Default access point — Select the access point to use for the internet connection.

•Public user name — Enter your user name received from your service provider.

•Use compression — Select if compression is used.