Moxa Technologies EDS-408A Configuring Relay Warning, Mail Server IP/Name, Account Name, 3-47

EDS-408A/405A Series User’s Manual				Featured Functions
	Mail Server IP/Name
		Setting	Description	Factory Default
		IP address	The IP Address of your email server.	None
	Account Name
		Setting	Description	Factory Default
		Max. 45 Charters	Your email account.	None
	Password Setting
		Setting	Description	Factory Default
		Disable/Enable to	To reset the Password from the Web
		change Password	Browser interface, click the Change
			password check-box, type the Old	Disable
			Password, type the New Password, retype
			the New password, and then click Activate.
			The password can be a maximum of 45
			characters.
		Old Password	Type the current password when changing	None
			the password
		New Password	Type new password when enabled to
			change password. The password can be a	None
			maximum of 45 characters.
		Retype Password	If you type a new password in the
			Password field, you will be required to
			retype the password in the Retype new	None
			password field before updating the new
			password.
	Email Address
		Setting	Description	Factory Default
		Max. 30	You can set up to 4 email addresses to	None
		Characters	receive warning emails from the EDS.
	Send Test Email
	After finishing with the email settings, you should first press the Activate button to activate those
	settings, and then press the Send Test Email button to verify that the settings are correct.
NOTE	Auto warning e-mail messages will be sent through an authentication protected SMTP server that

supports the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and Security Layer) authentication mechanism.

We strongly recommend not entering your Account Name and Account Password if auto warning e-mail messages can be delivered without authentication mechanism.

Configuring Relay Warning

The Auto Relay Warning function uses relay output to alert the user when certain user-configured events take place. There are two basic steps required to set up the Relay Warning function:

1.Configuring Relay Event Types

Select the desired Event types from the Console or Web Browser Event type page (a description of each event type is given later in the Relay Warning Events setting subsection).

3-47