Moxa Technologies EDS-405A Network, Port Transmission Speed, FDX Flow Control, Port Type, Setting

EDS-408A/405A Series User’s Manual			Featured Functions
Port Transmission Speed
	Setting	Description	Factory Default
		Allows the port to use the IEEE 802.3u
	Auto	protocol to negotiate with connected devices.
		The port and connected devices will determine
		the best speed for that connection.	Auto-nego
	100M-Full	Choose one of these fixed speed options if the
		Ethernet device at the other end has trouble
	100M-Half
		auto-negotiating for line speed.
	10M-Full
	10M-Half

FDX Flow Control

This setting enables or disables the flow control capability of this port when the port transmission speed setting is on auto mode. The final result will be determined by the auto process between the EDS and the connected device.

	Setting	Description	Factory Default
	Enable	Enables the flow control capability of this port
		when in auto-nego mode.	Disable
	Disable	Disables the flow control capability of this
		port when in auto-nego mode.
Port Type
	Setting	Description	Factory Default
		Allows the port to auto detect the port type of
	Auto	the Ethernet device at the other end and
		change the port type accordingly.	Auto
	MDI	Choose the MDI or MDIX option if the
		Ethernet device at the other end has trouble
	MDIX
		auto-negotiating for port type.

Network

The Network configuration allows users to modify the usual TCP/IP network parameters. An explanation of each configuration item follows.

3-6