Motorola KEM-ML36901 manual = Medium Sensitivity for most environments, VibraCallTM Alert, Weather

3 = High Sensitivity for quiet environments

2 = Medium Sensitivity for most environments

1 = Low Sensitivity for noisy environments

Note: When you connect a headset, the radio is automatically set to the last chosen sensitivity level.

QT Noise Filtering

The QT noise-filtering feature helps to ensure uninterrupted communication with other Motorola radios that have this feature. This feature also filters out unwanted transmissions from other radios. This is useful in places where there is heavy radio traffic, such as amusement parks or ski resorts.

Note: QT noise filtering is not available when the radio is scanning.

To turn QT noise filtering on or off:

1.Press until displays. The current setting On/Off will flash.

2.Press or to turn noise filtering On or Off.

3.Press to confirm your selection or to continue set up.

To transmit to a radio that has QT noise filtering turned on:

1.Select the same channel and Interference Eliminator Code as the other radio.

2.Press and speak normally.

Note: For a 30-second period, starting after the last transmission, all transmissions received on the selected channel and code will pass through the QT noise filter.

VibraCallTM Alert

3. Successful pairing will be indicated on the MU350 radio by a tone

and a brief flashing of the BLUETOOTH®LED indicator to confirm
entry to connected mode.	Flas
	Butto

4.With the MU350 BLUETOOTH® enabled, press and hold the Scro button for about three seconds to enter pairing mode. A tone will sound and the BLUETOOTH® blue LED indicator on the radio will flash.

Pairing the PTT Pod - 1693 with the MU350 Series Radio

1.Enable the MU350 Series Radio’s Bluetooth functionality (see above)

2.Ensure the PTT Pod is off.

3.Press and hold the power on/off button until the PTT Pod LED

indicator light flashes blue and red alternatively.

Flas

Butto®

4. With the MU350 Series Radio BLUETOOTH enabled, press and hold

the buttScron for about three seconds to enter pairing mode. A tone will sound and the BLUETOOTH® blue LED indicator on the radio will flash.

5. Successful pairing will be indicated by a tone and brief flashing of the BLUETOOTH®LED indicator to confirm entry to connected mode.

6. If pairing was successful, the BLUETOOTH®LED indicator of the radio will flash blue at 5 second intervals.

7. If pairing fails, turn the PTT Pod and the MU350 Series Radio off and repeat the above process.

After successful pairing, you can talk and listen via the paired

BLUETOOTH® headset and/or use the PTT Pod to activate the PTT

(Hig

function on the MU350 series radio.

Note: You must press and hold Pushon the radio to transmit when only a

(Low

headset is paired (to enable the wireless PTT function, the MU350 series

uses the channel and code combinations for each of the 22 channels as you have set them ( or with the default code value of 1). The “Advanced Scan” mode will scan all channels for any and all codes, detect any code in use, and use that code value temporarily for that channel.

Priority is given to the “home channel,” that is, the channel (and Interference Eliminator Code) your radio is set to when you start the scan. This means the initial channel (and code setting) is scanned more often than the other 21 channels, and your radio will respond quickly to any activity occurring on the home channel as a priority.

To start Scanning:	—Vibra
1. Briefly press the Skeycan. The scan	will appear in the display, and the
	—Scan

—Dual

radio will begin to scroll throughns) the channel and code combinations.

Menu

—Repe

2.When the radio detects channel activity matching the channel and

(Hig

code combination, it stops scrolling and you can hear the transmission.

3. To respond and talk to the person transmitting, press	withinPush	five
seconds after the end of the transmission.	(Low

4.The radio will resume scrolling through the channels five seconds after the end of any received activity.

5.To stop scanning, briefly press the Scankey.

To start Advanced Scanning: Menu

1. Set the Interference Eliminator Code to “zero” or OFF.

2. Briefly press the Skeycan. The scan	—Vibra
	will appear in the display, and
	—Scan

—Dual

the radio will begin to scroll throughns) the channels. No Interference

Menu

—Repe

Eliminator Codes will filter what is heard.

3. When the radio detects channel activity with ANY code (or NO code), it stops scrolling and you can hear the transmission. Any

Interference Eliminator Code that may be in use by that party will be

(Hig

detected and displayed.

Flas

Menu Butto

2.	Press	Scrolor	toScroselect On/Off. If you activate Weather Alert and
			on	—Call T
		(Hig		Keyp
			ep)
				—Weat
	return to two-way mode,			will display.
3.	Press	Push		—Hand
		Mtoenuave the Weather Alert setting.
		(Low		With
				Acce
4.
	Press Stocrolreturn to two-way mode.

As with two-way radio reception, weather channel reception depends on how close you are to a transmitter and whether you are indoors or outdoors. Because weather channels are transmitted without codes, they may contain static or noise. Weather Alert will not function while actively transmitting or receiving in two-way mode.

Scanning for Weather Channel

The radio can scan for an active NOAA transmission automatically.

1. After turning weather reception on, briefly press the Skeycan.

—Vibra

2. The scan icon will—Scanappear in the display, and the channelMenuwill

—Dual

scroll throughns) the NOAA channels 1-7.

—Repe

3.When the radio detects channel activity, it stops scanning and you

Flas

	can hear the transmission.			Menu	Butto
4.	You may resume the scan by briefly pressing			Scror ol	.Scro
5.	To stop scanning, briefly press the		Scankey. The scan icon			—Vibra
						—Scan
						will
	disappear.		Menu	ns)		—Dual
						—Repe
	Weather Channels and Frequencies
	Weather	Frequency	Weather		Frequency
	Channel		Channel
	WX1	162.550 MHz	WX7		162.525 MHz

Warranty

Consumer Two-Way Radio Products and Accessories purchased in the United States.

What Does this Warranty Cover?

Subject to the exclusions contained to the right, Giant International Ltd. warrants the Motorola branded consumer two-way radios that operate via Family Radio Service or General Mobile Radio Service that it manufactures (“Products”), the Motorola branded or certified accessories sold for use with these Products that it manufactures (“Accessories”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer’s exclusive remedy, and applies as follows to new Motorola branded Products and Accessories manufactured by Giant International Ltd., and purchased by consumers in the United States, which are accompanied by this written warranty:

Who is covered?

This warranty extends only to the first consumer purchaser, and is not transferable. It covers use by consumers for recreational use only.

What will GIANT INTERNATIONAL LTD. do?

GIANT INTERNATIONAL LTD., at its option, will at no charge repair, replace or refund the purchase price of any Products or Accessories that does not conform to this warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA SOLUTIONS, INC. OR GIANT INTERNATIONAL LTD. BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.

VibraCallTM is a vibrating alert that notifies you that your radio is receiving a message. This is useful in noisy environments. When the alert is on, the radio vibrates once every 30 seconds when you receive a message on the channel and code you set.

1.To turn vibrating alerts on, press until sidisplayed. The current setting will flash.

2.Press or to change the setting to On/Off.

3.Press to set or to continue set up.

Keypad Tones

You may enable or disable the speaker key tones. You will hear the key tone each time a button is pushed.

1.Press until appears. The current setting On/Off will flash.

2.Press either or to turn On or Off.

3.Press to confirm or to continue set up.

Note: When the key tone feature is off, the following are not disabled:

•Transmit timeout alert tone

•Call tone

•Low battery alert tone or

•The transmitted talk confirmation tone

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish transmitting. It is like saying “Roger” or “Over” to let others know you are finished talking.

1.With the radio on, press until the appears. The current setting On/Off flashes.

2.Press or to turn On or Off.

3.Press to set or to quit menu mode.

Dual Watch Scan

This feature allows you to monitor two channels at the same time.

1.Press the button until the Dual Channel Scan icon displays.

2.Press the or buttons to select the second channel for Dual Watch reception. (if you want to disable the Dual Watch function, set it to ‘OFF’).

3.Press or the PTT button to confirm the channel selection.

When the Dual Watch feature is activated, the radio will switch sequentially between the primary and the Dual Watch channels.

radio also needs to be paired with the Bluetooth PTT POD model 1693).

To turn off the blueTooTh® function:Scan —On/O

featu

1.With the radio on, short press Menuuntil —appearsBluet . The current

Flas

setting On/OffMenuwillButtoflash.	Scrol
(Hig

2.Press Scrolor toScroselectScanOff.

3.Press toPushet or Mtoenucontinue set up. The BLUETOOTH® LED

(Low

indicator will stop flashing.

Scrol

Note: The PTT Pod is an optional accessory which is sold separately

Special Features

Emergency Alert Mode

The Emergency Alert feature can be used to signal members in your group if you need urgent help. The MU Series radios will operate in an automatic “hands-free” emergency control mode for a total of 30 seconds after activating the Emergency Alert. The MU Series radios in your group will automatically advance the speaker volume to the maximum setting and sound a warbling alert tone for 8 seconds. The alert tone is emitted from your own radio speaker and the receiving radios in your group. After the 8 second alert, any spoken words or incidental sounds at your end will be transmitted to the group for 22 seconds. For the 30 second duration of Emergency Alert mode, the MU Series radio controls and buttons will be locked to maximize reception of the emergency message.

1.Press and hold the Emergency Alert button Emerfor three seconds.

2.Release the button after the LED Indicator glows red and the alert tone begins to sound. There is no need to continue to hold the Emergency Alert button or use PTT for your message to be transmitted.

3.After the alert tone ends you may speak into the microphone. Your voice or incidental sounds will be transmitted. The LED indicator will continue to glow for the duration of the 22 second period.

4.After 30 seconds your radio speaker will emit a Talk Confirmation Tone and the LED Indicator will extinguish. Operation then returns to normal two-way mode.

Note: All Motorola Talkabout EM, MJ, MR, MT and MU Series radios are fully compatible with the Emergency Alert feature. Radios other than EM, MJ, MR, MT and MU Series can receive the emergency alert signal, but will not respond with adjusted volume settings, locked controls, or a warbling alert tone. Users of other radio models set to the same channel and Interference Eliminator Code will hear a steady tone for eight seconds

4.	To respond and talk to the person transmitting, press		withinPush five
			(Low
	seconds of the end of the transmission. The radio will transmit using
	the newly detected Interference Eliminator Code.
5.	The radio will resume scrolling through the channels five seconds
	after the end of any received activity.
6.	To stop scanning, briefly press the	Skeycan.
	(Hig
Scanning Notes:		Menu

1. If you press whilePush the radio is scrolling through inactive channels,

(Low

the transmission will be on the “home channel”. Scanning will

resume five seconds after the end of your transmission. You may press the Skeycanto stop scanning at any time.Flas

MenuMenu Butto

2. If the radio stops on an undesired transmission, you may immediately

resume the scan by briefly pressing Sorcrol .Scro

3. If the radio repeatedlyFlas stops on an undesired transmission, you may

Menu Butto

temporarily remove that channel from the scan list by pressing and

holding Sorcrol forScrothree seconds. You may remove more than one channel in this way.

4.To restore the removed channel(s) to the scan list, turn the radio off

and then back on, or exit and re-enter the scanning mode by pressing Scan.

5.You cannot removeMenu the home channel from the scan list.

6.In Advanced Scan, the detected code will only be used for one transmission. You must note the code, exit scan, and set that detected code on that channel to permanently use the detected code.

Weather Receiver

Your radio can tune in to broadcasts by the United States National Oceanic and Atmospheric Administration (NOAA) Weather Radio.

You can listen to a weather channel (see “Weather Channels and Frequencies” table for details) or set your radio to alert you to emergency weather broadcasts that interrupt routine broadcasts. When you listen to a weather channel, you cannot use your radio in scan mode or for two-way communications.

NOAA has transmitters located throughout the United States. These transmitters broadcast watches, forecasts, and other information 24 hours a day.

Note: NOAA weather radio stations are assigned to cover specific areas and service may be limited. Please check with your local weather office for frequency and details, or visit www.weather.gov/nwr in the US to view the

WX2	162.400 MHz	WX8	161.650 MHz
WX3	162.475 MHz	WX9	161.775 MHz
WX4	162.425 MHz	WX10	161.750 MHz
WX5	162.450 MHz	WX11	162.000 MHz
WX6	162.500 MHz

Products Covered

Products and Accessories as defined above, unless otherwise provided for below.

1.Consumer Two-Way Radio Accessories.

2.Products and Accessories that are Repaired or Replaced.

Length of Coverage

One ( 1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.

1.Ninety ( 90) days from the date of purchase by the first consumer purchaser of the product.

2. The balance of the original warranty or for ninety ( 90)

days from the date returned to the consumer, whichever is longer.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.

Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity, heavy perspiration, when the battery door or accessory port seals are not closed, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola Solutions, Inc. or Giant International Ltd., are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage.

Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola Solutions, Inc, Giant International Ltd. or its authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.

The active channel will display for five (5) seconds after any activity has ended on the dual channel. You may talk on the Dual Watch channel during this period.

BLUETOOTH® Pairing

The MU series BLUETOOTH® radio works with any qualified BLUETOOTH® headsets from BLUETOOTH® SIG, Inc. and with the Talkabout® Wireless BLUETOOTH® PTT POD - 1693.

Note: To avoid paring to the wrong device, please switch off all other Bluetooth devices before pairing process.

1.With the radio on, briefly press until appears on the LCD. The current setting On/Off will flash.

2.Press either the or the to select On.

3.Press the PTT button to confirm the selection.

The BLUETOOTH®of the radio is now in standby (connectable) mode.

Pairing any BT headset with the MU350 Series Radio

1.With the MU350 BLUETOOTH®enabled, press and hold the - button

for about three seconds to enter pairing mode. A tone will sound and the BLUETHOOTH®blue LED indicator on the radio will flash quickly.

2.Follow the BLUETOOTH® headset manufacturer's instruction to enable its BLUETOOTH® function and entry to paring mode.

followed by the voice transmission for 22 seconds.

Warning: The Emergency Alert feature should only be used in the event of an actual emergency. Motorola is not responsible if there is no response to the emergency alert from the receiving group.

Built-in Flashlight

Press and hold the flashlight button to turn and keep the light on. The switch functions as a momentary control for the light.

Note: Turn off the flashlight when not in use to conserve battery power.

Keypad Lock

	Scan	—Chan
		Indica	radio settings:
To avoid accidentally changing your(see m
1. Press and hold	Menuuntil	displays.
		—Keyp

—Talk C
2. When in lock mode,Scroly u can turn the radio on and off, adjust the
Tone
volume, receive, transmit, send a call tone, and monitor channels. All
other functions are locked.	Scan	—Chan
		Indica
		(see m
To unlock the radio, press and hold	Menuuntil	—Keyp
		is no longer displayed.
Scanning Channels	Scrol	—Talk C
		Tone

Use scan to search the 22 channels for transmissions from unknown parties, to find someone in your group who has accidentally changed channels, or to quickly find unused channels for your own use.

There is a priority feature and 2 modes of scanning ( basic and advanced ) to make your search more effective. The basic scan mode

appropriate transmitter for your area.

The use of the NOAA logo does not provide an endorsement or implied endorsement by NOAA’s National Weather Service.

Turning Weather Channel Reception On andMenuOff

1.To turn weather receptionMenu on, press Scroland hold for 3 seconds.

2.To turn off, press Scrolor turn the radio off and then back on.

Setting the Weather Channel

Your radio receives weather frequencies: Scan

1.After turning weather reception on, press Menu. The current

Flas

Butto	Scrol
channel flashesMenu .

2.Press Scrolor toScroselect the appropriate channel with good

(Hig

reception in your area.

3.Press toPushave the weather channel setting.

(Low

Setting the Weather Alert

Your radio can be set to respond to NOAA Weather Radio emergency messages. A special alarm tone sounds an alert and turns on the weather receiver to give you immediate weather and emergency

information.Scan

1.After turning weather reception on, press Menutwice. On/Off displays.

Scrol

Patent and Copyright Information

Manufactured, distributed or sold by Giant International Ltd., official licensee for this product. MOTOROLA, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. ©2013 Motorola Solutions, Inc. All rights reserved.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

USA Two-Way Radios 1-800-638-5119 support@giantintl.com

For Accessories, please call the telephone number designated above for the product with which they are used.

You will receive instructions on how to ship the Products or Accessories at your expense, to a GIANT INTERNATIONAL LTD. Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.

MU Series