USER MANUAL
•Continuous Access Mode (default) – the wireless LAN adapter is constantly operating with full power. This mode consumes the most power.
•Maximum Power Save – the wireless LAN adapter consumes the least power. This mode only operates when there is wireless network activity.
•Power Save – the wireless LAN adapter consumes moderate level of power.
Preamble Type: Select Long or Short Preamble type.
Preamble is a sequence of bits transmitted at 1Mbps that allows the PHY circuitry to reach steady-state demodulation and synchronization of bit clock and frame start. Two different preambles and headers are defined: the mandatory supported Long Preamble and header, which interoperate with the 1 Mbit/s and 2 Mbit/s DSSS specification (as described in IEEE Std 802.11), and an optional Short Preamble and header (as described in IEEE Std 802.11b). At the receiver, the Preamble and header are processed to aid in demodulation and delivery of the PSDU. The Short Preamble and header may be used to minimize overhead and, thus, maximize the network data throughput. However, the Short Preamble is supported only from the IEEE 802.11b (High- Rate) standard and not from the original IEEE 802.11. That means that stations using Short-Preamble cannot communicate with stations implementing the original version of the protocol. Click “Apply” for the changes to take effect.
Support Band: There are two modes the user can select, including 11B and 11G. The default setting is 11B and 11G are enabled, which is interoperable with both 11B and 11G devices.
Note: user must select one of 11B or 11G at least; otherwise the wireless connection will not function.
