| ECM-RACEWY | Owner’s Manual |
| ECM-20, ECM-20M, & ECM-30 |
| |
| | |
Activating an ECM via ECS-6RM Relay Contacts
Each Channel of the ECS-6RM also has a Relay contact that works in conjunction with the ECM control port. Sequencing and timing of these connections are the same as the corresponding ECM channels. Example: Sequence 1 ECM Port output works at the same times CH 1 Relay contact. Note: All ECM modules can be trigger using the Relay contacts to activate the ECM module. See ECM module for details.
ECS-6RM Wiring Configuration
Example 1
ECS-6RM wired to six ECM-20 or ECM-20M Modules.
Example 2
ECS-6RM wired to four ECM-20 or ECM-20M Modules in the ECM-RACEWY6 and two separate ECM-15SH and ECM-20SH housings.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
