Atlas Sound AH5040CD Installation Via Mounting Bracket Included, Installation Instructions

Models: AH5040CD

1 12
Download 12 pages 6.37 Kb
Page 5
Image 5
INSTALLATION VIA MOUNTING BRACKET (INCLUDED)

AH5040CD INSTALLATION

INSTALLATION INSTRUCTIONS

INSTALLATION VIA MOUNTING BRACKET (INCLUDED)

General considerations and hardware recommendations

CAUTION: The AH5040CD weights 81 pounds (36.7kg). A fall from almost any height could result in serious injury or death. Assure that the speaker is firmly mounted to an object that can handle the weight of the AH5040CD. Remember that wind will add considerable torque to the point of attachment. The mounting surface the AH5040CD is being attached to should be able to handle five or more times the weight of the AH5040CD (7x recommended for locations subject to high wind forces).

Whenever the loudspeaker is mounted to a surface using the bracket, the installer must ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely and securely attached both to the loudspeaker and the surface in question, using only the mounting holes. A general rule for soft surface installations (wood beams) is to multiply the corresponding working load limit by 75%: the result will be an approximation of working load strength.

Use thread locking compound for all installations.

CAUTION: Mount the speaker such that the shear force is at a right angle to the mounting bolts, and close to the connection, as shown:

Lock Washer

SHEAR FORCE Manual background

TENSION FORCE

Flat Washer

When mounting the AH5040CD to a solid surface use the proper bolts, washers and lock washers (Grade 5 minimum). Do not substitute mismatched bolts and washers.

The AH5040CD may be mounted to a pole or scoreboard. For such mounting, contact the light pole or scoreboard manufacturer for proper instructions.

If mounting to another surface, such as a beam, see the diagram on page 7 for mounting hole locations.

When in doubt contact a qualified structural/mechanical engineer for approval of the mounting materials and methods.

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

TELEPHONE: (800) 876-3332

• FAX: (800) 765-3435

©2004 ATLAS SOUND LP

Printed in U.S.A.

ATS001856 RevA 7/04

PP

Page 5
Image 5
Atlas Sound AH5040CD specifications Installation Via Mounting Bracket Included, Installation Instructions