7.Two sets of wires with two SATA drive connectors at one end and a
Note: The SATA connectors include a +3.3V output so you can power the latest SATA devices.
Modular Cables:
# | Quantity | Part Name | Description |
|
|
|
|
1 | Power supply | Includes | |
|
|
| |
|
|
|
|
4 | 1 | 14 cm Molex to | Includes one Molex and two floppy |
|
| Floppy connectors | connectors |
|
| w/cable |
|
|
|
|
|
5 | 2 | 60 cm PCI Express | Includes one PCI Express connector |
|
| connector w/cable |
|
|
|
|
|
6 | 2 | 77 cm Molex | Includes three Molex connectors |
|
| connector w/cable |
|
|
|
|
|
7 | 2 | 73 cm Serial ATA | Includes two Serial ATA connectors |
|
| connector w/cable |
|
|
|
|
|
Installation:
This PSU is backwards compatible to previous ATX specifications. To make sure you connect your PSU properly, please refer to the user manual supplied with your motherboard and peripherals before connecting the NeoPower to any of your devices.
1. | Connect the | Picture 2 | Picture 3 |
| motherboard uses a | ||
|
|
| |
|
|
| |
| (see pictures 2 and 3). Note: the detachable |
|
|
|
|
| |
| +12V connector. | For | For |
2. | Connect the | motherboards | motherboards |
| needed for your motherboard. |
|
|
3.In the package, you will find 2 sets of power
Molex connectors. Connect the
4.In the package, you’ll find 2 sets of power
5.In the package, you’ll find one PCI Express graphic card connector. It’s the only
6.If you have a floppy drive, connect the
6