Antec Plus 550 user manual Special Quiet Computing Fan Operation, Advanced Cable Management System

Special Quiet Computing Fan Operation

NeoPower power supplies feature an innovative design that decreases noise during normal use, but which allows for superior cooling capabilities as loads increase. Owing to its ultra high efficiency and low heat generation, NeoPower can utilize an 80mm exhaust fan that rotates slowly and quietly to blow hot air out of the PSU, speeding up as heat increases.

Advanced Cable Management System

NeoPower power supplies feature Antec’s Advanced Cable Management System. It allows you to use only the power cables that you need, thereby reducing clutter and improving airflow inside your case. Inside the package, apart from a power cord, you will find the following cables: (see picture 1)

Picture 1

Attached to the power supply, you’ll find the following:

1.Five 6-pin output sockets, for use with the wire sets to power your drives and other peripherals.

2.4-pin and 8-pin +12V connectors.

3.A 24-pin configurable main power connector with detachable 4-pin section for 20-pin applications.

Advanced Cable Management Wire Set (Modular Cables)

4.One Y-adapter with one standard 4-pin Molex peripheral connector at one end and two female Floppy power connectors at the other end.

5.Two sets of wires with a 6-pin PCI Express graphic card connector at one end and a 6-pin PSU connector at the other end.

6.Two sets of wires with three standard 4-pin Molex peripheral connectors at one end and a 6-pin PSU connector at the other end.

5