Atlas Sound CP700 specifications Unbalanced Input, Owners Manual, AtlasSound.com

CP700 COMMERCIAL POWER AMPLIFIER

OWNER'S MANUAL

Unbalanced Input

Unbalanced wiring typically is found on consumer equipment (CD players, DVD players, etc.) and is generally a compromise of noise rejection and cable lengths. A single conductor and an overall shield are most common, as in the "bargain type" cables supplied with consumer gear. Keep unbalanced wire lengths within 10 feet between equipment, and wire the hot lead to the "+" terminal, and the shield to the ground terminal. Do not forget to install a jumper wire between the "-" terminal and the ground, as a loss of gain will result without this jumper (Figure 4).

White/Red (+)	White/Red (+)
Shield	Shield
IN	IN

-2	-1
+ - GND -	+

Jumper

THRU

GND

			2
		6	2
	2
2
3
0
4
6
5
		0
			0
			-

8	16	1
1
		4
		1
		2
			1
			0
				8
				6
			2	4
		0

LEVEL

				8	16	1		THRU
			2	1
						4
		6	2			1
	2					2
2						1
3							0
								8
0
								6
4
6							2	4
5						0
		0
			0
			-

LEVEL

Figure 4

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •		TELEPHONE: (800) 876-3333 •	FAX: (800) 765-3435
©2005 ATLAS SOUND LP	Printed in U.S.A.	ATS002102 RevC 9/05	PP

8